The correct braking assembly kit for a Dexter 4,000 Lb Axle is the Dexter Electric Trailer Brake Kit part # K23-462-463-00 for manual adjust or Dexter Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 for self-adjust. These are almost the same as the brakes for a Dexter 3,500 Lb Axle expect for the magnet size which is much smaller therefore they are weaker and the mounting flange pattern is slightly different. Please note, manual adjust brakes require user adjustments every so... view full answer...
Yes, it can and you are correct. The Hollywood Racks Sport Rider SE Bike Rack item # HLY84FR is extremely sturdy and will function perfectly on the back of a motorhome. This bike rack fits a 2" receiver and has an 80 lbs per bike capacity.
I have linked a review video below that will show you how to set this bike rack up on the back of a motorhome. view full answer...
If your existing leaf springs measure 25-1/2" then the correct replacement is likely either 25-1/8" or 25-1/4" as leaf springs stretch over time. Please note, leaf springs should also be measured with the trailer unloaded. I have attached for you below options in both these lengths, you'd just need to filter with your axle capacity. The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles part # e54SR is a pretty common replacement measuring 25-1/8". view full answer...
For your 2020 Salem Cruise Lite travel trailer I recommend using the Bargman Trailer License Plate Bracket # 30-62-030. This bracket can easily be slid behind one of your trailer's tail lights to hold your license plate.
The mounting holes are 1-3/4" apart center-to-center but if your tail light mounting screws are spaced differently you can just shoot through the metal with some self-tapping screws to complete the installation. view full answer...
The Forest River Rockwood Ultra Lite 2806BS measures 30' but if we subtract 3' for the tongue we end up with 27' which is what size cover we should be searching for. Therefore, the correct size Adco Olefin HD RV Cover is part # AD87ZR. view full answer...
You will want the Curt TruTrack Weight Distribution System w/ Sway Control # C17499 for your 2018 Forest River Wildwood M-171RBXL. This system is rated for tongue weights of 500-800lbs with a maximum trailer weight of 8,000lbs.
For your current tongue weight of 521lbs and adding 40lbs for the 2-20lb propane cylinders, 50lbs for the battery and box will put you at 611lbs. This leaves you with 189lbs of additional gear on the front of your Wildwood. You do not need to include the weight... view full answer...
The slide-out toppers you would need for you 2019 Forest River Wildwood Heritage Glen LTZ Travel Trailer are:
For the 183 1/2" slide-out, I recommend the Solera RV Slide-Out Awning - 15'7" Wide - 48" Projection - Black # LCV000194925.
For the 153 1/2" slide-out, I recommend the Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection - Black # LCV000168109.
For the 83 1/2" slide-out, I recommend the Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - White
# LCV000163288.
I recommend... view full answer...
The SC97VR is not a fit for the 2019 RAM 2500 and there are no backup cameras that will tie into the factory wiring on your truck. Your best bet is to install a universal backup camera that uses a different monitor than your truck's OEM screen.
I recommend going with the Rear View Safety WiFi Hitch Backup Camera System - Wireless # RVS-83112-WiFi. This system is completely wireless with a rechargeable battery and built-in WIFI connection (pre-existing WIFI is not necessary, so it works... view full answer...
For a trailer hitch receiver that will fit your 2019 Forest River Rockwood Mini Lite travel trailer what you can use is a universal fit hitch, from Curt:
- Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703
We installed this on a '17 Rockwood Mini Lite so we know it will work for your trailer. It is about nine inches from the hitch opening to the edge of the bumper so you'll want to be sure your bike rack has the necessary clearance. If not, you'll have to go with... view full answer...
While we don't have just the grey pad of the Yakima Raptor Roof Mounted Bike Rack we do have the entire jaw pad assembly with the part # 8820182 instead which would be your best option. view full answer...
I spoke with Dometic to confirm your model number, thanks for all the information you provided, and was able to determine that you have a Dometic Penguin II with a heat pump so you'll be able to use the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006 to replace your current shroud. view full answer...
The correct floor mats for a 2022 Forest River Freelander Class C on Ford E-450 Chassis are the WeatherTech All-Weather Front Floor Mats part # WTW51 for black, part # WTW51GR for gray, or part # WTW51TN for tan. view full answer...
I do have options for you but the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise part # LC432698 (358991 is the manufacturer part number) will not fit properly because the opening on your trailer is 28" and the frame of the steps is 28" the fit will be too snug.
I recommend to use Flexco Manual Pull-Out Steps for RVs part # SMFP-2100 which is 27-5/8" wide for a perfect fit on your trailer if you want to utilize the space under the door for a pull out step. There is not a quad... view full answer...
The Marine Speaker w/ LED Lights - Recessed Mount - 5-7/8" Diameter - 35 Watt - Black - Qty 1 # 324-000020 will fit your trailer. They aren't fit guided for every vehicle but they fit anything with mounting hole spacing 3-7/8 inches on center with a recessed mounting hole. They will replace your factory speakers.
You may simply need to refresh your screen to allow you to access your cart and checkout. view full answer...
The Jensen Stereo -AM/FM - CD/DVD - USB - Bluetooth # JWM60A is compatible as a replacement for your Concertzone ZX300. This will be a really nice upgrade from that system that has 3 zones, can play CDs, DVDs, has Bluetooth, USB input and an aux cord. It requires a rough opening 9 inches wide by 6 inches tall by 5-1/2 inches deep. The overall unit is 10-7/16" wide x 7" tall x 6-1/2" deep. view full answer...
The closest option to your 8.25" x 5" oval light would be the Omega RV Double Dome Light with Switch # 328-001-902XPW. Since most dome lights are surface mounted with just a small hole for the wiring to pass through you'll be able to cove the hole with the housing of this light with ease. view full answer...
The Reese Strait-Line Weight Distribution System w/ Sway Control item # RP66082 would work for your 2022 Keystone Springdale trailer if you were never going to fully load it. Tongue weight is typically 10%-15% of your trailer's total weight so you would be well over the 600 lbs maximum capacity of that system. I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37100ET. This system has a tongue weight range of 600 lbs - 1,000 lbs and would be a... view full answer...
The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 isn't designed to be used on a travel trailer with the landing gear legs swapped out for smaller rear jack legs. Lippert does make a version designed for a travel trailer (part # LC672136 ) but it has a 10,000lb capacity so you'd be over that.
The controller wouldn't be able to communicate properly with the legs so it would just keep throwing up error codes and wouldn't... view full answer...
Both the Curt TruTrack 2P Weight Distribution System # C69JR and Reese Pro Round Bar Weight Distribution # RE44FR are going to use a 2-5/16" Ball # C40030 with a 1-1/4" shank. You will want to use the 2" Ball # A-90 to switch to a 2" hitch ball.
You are able to back up with the Reese # RE44FR. view full answer...
I wish I had a straightforward yes or no answer to your question, but to be perfectly honest this is a universal hitch and we haven't tested it out for different mounting scenarios. The one thing I can say is that the mounting brackets that come with the Curt Hitch # 13703 can be mounted so that they are facing in towards the middle of the camper or out towards the sides of the camper depending on what your situation calls for with the stabilizer like part # LC369774 installed.
Hopefully... view full answer...
Go To Results